Hebei Xugong Kunpeng Wuxi Branch

HOT PRODUCTS:

TEL:15351685709

GR3505

  consultation

For specific preferential policies, please call 15351685709



Product selling points
Heavy-duty work gear. It is equipped with friction worm gear box with overload protection, large modulus and high wear-resistant slewing ring gear, reinforced traction frame, heat treatment of guide rails, optimization of blade arc, integral angle device, safe and reliable.
Electronically controlled dual handles. Change the traditional multi-handle operation mode and reduce the driver's control intensity by 70%.
Efficient powertrain matching. The three-stage variable power engine is adopted, which has high reliability and fuel economy, low emissions, and meets the requirements of Euro III emission regulations. Equipped with a hydraulic transmission with a lock-up clutch, energy saving is achieved through "automatic shifting". At the same time, the gearbox can switch between "manual" and "automatic" working modes. The speed change in manual mode is achieved by manually operating the gearshift lever. In automatic mode, the gearbox will detect the engine speed and vehicle speed. And other information to achieve automatic shifting.
Load sensing hydraulic system. The system has small operating force, low hysteresis, low power loss, and much higher efficiency than conventional hydraulic systems, and achieves synchronization of multi-channel manipulation and compound actions.
Dual-circuit wet brake rear axle for mining. German NAF rear axle specially developed for mining uses built-in non-slip differential. The balance box transmission uses the industry's unique gear transmission instead of the chain transmission, which is efficient and reliable.
Temperature controlled independent cooling technology. The temperature-controlled independent cooling system realizes that the fan rises to the maximum speed when the engine speed is low; when the engine is cold-started at a low temperature, the solenoid valve on the fan drive valve group can be opened to adjust the control pressure of the plunger pump to achieve the control of the fan speed. To achieve the purpose of energy saving and consumption reduction.
Pressurized cab technology. The air in the cabin can be kept clean and positive pressure, and can be continuously cleaned for 48 hours.
Fault diagnosis and GPS remote control technology. The engine and transmission are equipped with an automatic fault diagnosis function, which can be monitored in real time through the GPS platform, and saves historical records for remote control.
Vibration reduction and noise reduction technology. The use of combined damping blocks reduces the vibration of the engine vibration source to the cab, optimizes and improves the structure of the muffler to reduce noise, increases the diameter of the fan, and reduces the fan speed ratio to reduce the noise of the cooling system.
 
Product configuration
project unit parameter
Technical Parameters    
Engine manufacturers -  
engine model - Cummins
Rated power / speed kW / rpm QSM11
Forward speed km / h 261/2100
Backward speed km / h 5 / 8.5 / 13/20/30/45
Traction force f = 0.75 kN 5/13/30
Minimum turning radius m 165
Blade length X chord height mm 9.6
Overall dimensions mm 4877x787
Total Weight Standard / kg 11500x3250x4100
 


PREV:GR1653
NEXT:GR165

SCAN WAP SITE

Copy right © 2020 Hebei Xugong Kunpeng Engineering Machinery Co., Ltd. Wuxi Branch